Specifications

39
4-7-2-2 Starting duo frequency receive
WR WRn: n: 0, 1
0: Duo receive Off (default)
1: Duo receive On
To read: WR<CR>
Response: WRn
4-7-2-3 Audio output balance
WV WVnnn: n: 000 ~ 255
128: default (equal balance between main frequency audio and offset frequency
audio)
(Note: 000 --- Main frequency only, 255 --- Offset frequency only)
To read: WV<CR>
Response: WVnnn
4-7-3 Tri frequency receive
Below is the procedure to activate the Tri frequency receive function:
 Set two separate frequencies as the main band according to the instructions on (4-7-2 Duo
frequency receive (Frequency offset receive)
 Set another frequency below 25MHz as a sub band.
5. Other receive commands
5-1 Priority receive
5-1-1 Priority setup
PP
TI
PPnnmm
n: 00 ~ 39 (Memory bank) (default: 00)
mm: 00 ~ 49 (Memory channel) (default:00)
TInn
nn: 01 ~ 99 (second) (Time interval)
(default: 10)
To read: PP<CR>, TI<CR>
Response: PPnnmm, TInn
5-1-2 Starting priority
PO POn: n: 0, 1
0: Priority Off (default)
1: Priority On
To read: PO<CR>
Response: POn