Specifications

38
4-7-1-1 Starting duo frequency receive
VW VWnm: n: @, A ~ D (VFO mode)
@: Duo receive off (default)
m: 0, 1
0: VFO-n (main band) (default)
1: VFO-E (sub band)
To read: VW<CR>
Response: VWnm
4-7-1-2 Audio output balance
VH VHnnn: n: 000 ~ 255
128: default (equal balance between main band audio and sub band audio)
(Note: 000 --- Main band only, 255 --- Sub band only)
To read: VH<CR>
Response: VHnnn
4-7-2 Duo frequency receive (frequency offset receive mode)
With this function, one frequency above 25MHz is set as a main frequency and another frequency which
is within +/- 5MHz from the main frequency set as an offset frequency can be received simultaneously.
The received audio for both frequencies is available at the headphone jack independently.
Mixed audio for both signals is available at the external speaker jack.
Either VFO mode or Memory mode can be used in the function.
Below are the requirements for Duo frequency receive function:
 The main frequency must be above 25MHz.
 The offset frequency must be within +/- 5MHz from the main frequency.
 Both frequencies must be in the same receive modes.
 FM stereo is not available in this mode.
4-7-2-1 Frequency offset
WF WFpnnnnn.nnnnnn: (MHz)
p: +, - (Offset direction)
nnnn.nnnnnn: 0 ~ 5MHz (default: 0)
To read: WF<CR>
Response: WFpnnnn.nnnnnn