Specifications

21
3-3 Power on the AR2300
3-3-1 Wake up
ZP Power on Wake up from stand-by mode (QP command) or
sleep mode (SP command).
ZPnn: 00 ~ 99, wake up ID
Note: The power switch must be in the ON position.
3-3-2 Wake up ID set up
ZI Set up wake up ID ZInn: 00 ~ 99 (default: 00)
To read: ZI <CR>
Response: ZInn
3-4 Power off the AR2300
3-4-1 Standby mode
QP Switches the AR2300 to
standby mode
The front power switch must remain in the ON
position.
3-4-2 Sleep timer
SP Sleep Timer SPnn:00 ~ 99 (unit: minute) (default: 00 : Off)
TR Sleep Timer Display
(Displays remaining
time)
TR0: display off
TR1: display on (default)
3-5 Audio gain
AG AGnnn (nnn: 000 –255) (default: 00)
To read: AG <CR>
Response: AG nnn
3-6 Frequency/memory channel up/down
ZK ZK Change upward
ZJ ZJ Change downward
3-7 Step frequency
ST STnnn.nnn (entry in kHz format) Default: 100.000 (kHz)
To read: ST <CR>
Response: STnnn.nnn (kHz)