Specifications

52
The manual AGC function is to adjust the receiver’s AGC (Automatic Gain Control) when it
is set OFF.
The default setting for Manual AGC is 255, maximum gain control value.
The value can be adjusted according to the receiving condition.
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to “MANU AGC” selection point.
Use the main tuning dial or the right arrow key or the left arrow key to vary the manual AGC
level for best reception.
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu
(IF-GAIN).
6-6 Configure IF-GAIN (Intermediate Frequency gain)