Specifications

50
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu (LAMP).
6-2 Configure lamp
The AR-ONE is equipped with high intensity green LEDs to illuminate the LCD and keypad
when operating in areas of low level lighting.
The lamp may be configured in three ways:
AUTO The lamp will automatically illuminate when the keypad or main tuning dial are
used.
The lamp will remain illuminated for further five second after the last key push and then
switch off. The lamp will also automatically illuminate while the squelch opens.
ON This is default setting. The lamp will continuously illuminate the LCD and keypad.
OFF The lamp remains permanently extinguished, this is useful when used in areas of
high light levels.
To access the configuration menu, push the FUNC key and then push the 7 key.
Push the down arrow key to move the cursor to “LAMP” selection point.
Use the main tuning dial or the right arrow key or the left arrow key to toggle the lamp
between AUTO, ON and OFF.
Push the ENT key to accept the data and return to a standard display.
Alternatively, push the ESC key to abort entry.
Or, push the down arrow key to move to the next item on the configuration menu (DIMM).
6-3 Configure dimmer
A DIMM (dimmer) function is available to dim intensity of the LEDs. This function is useful
when used in areas of high light levels.
The default setting of DIMM is “OFF”.