Specifications

32
3-3 Memory read “M.RD”
Once frequency and mode data has been stored into a memory location, its retrieval is
quick
and simple.
Let’s assume that you are going to retrieve the frequency of 123.500 MHz which has been
programmed into memory “325” during an earlier example in the preceding section of this
manual.
Push the
FUNC
key and the push the
SCAN
key to go into
memory read mode
, the
“
M.RD
”
icon appears on the top left of the LCD to confirm operation. The AR-ONE will monitor
whatever memory channel you enter memory read.
The AR-ONE will display memory channel, mode, text comment (if one was used). The
memory channel last used (for memory write or recall) will initially be displayed. If the
desired memory channel is not immediately displayed, it may be recalled by keying in the
required three digit location.