Specifications

14
VFO
Push this key to select
VFO
mode. There are 10
VFO
s (
VFO-A
through
VFO-J
) with the
AR-ONE.
STEP
Push the
[FUNC]
key, and then push to select the desired frequency step.
MODE
Push this key to select the desired receive mode.
WIDTH
Push the
[FUNC]
key, and then push this key to select the desired IF band width selection
menu.
ATT
Push this key to activate the
RF ATT
(Attenuator). Move the cursor to select the desired
parameter. The
AUTO
selection will work best for most of cases.
AGC
Push this key to select the
AGC
(Automatic Gain Control) time constant of the receiver.
Move the cursor to select the desired
AGC
time constant. Usually,
FAST
is used to receive
CW,
MEDIUM
for AM and FM, and
SLOW
for SSB mode. When
MANU
is selected, any
desired parameter (between 0 – 255) can be selected for manual gain control.
dBm
Push this key to toggle a unit of the incoming signal strength in between
dBm, dBuV,
or
ordinary S unit.
0 ~ 9 , .
Numeric key
S. SET
Push the
[FUNC]
key, and then push this key to select the desired memory channels to
scan
in the
SELECT SCAN
mode.