Specifications

http://entropy.brneurosci.org/radio-misc.html
86 / 86 28.8.2007 13:16
The most important parameter for an active antenna is the third-order intercept point or IP3. A higher IP3 point
means less IMD. A high IP3 and low noise are to be preferred over high gain. Raven's antennas have very high
IP3 points.
Broadband Active Antennas Active antennas are intended for applications where the size of conventional passive
antenna cannot be accommodated. This is particularly true of MF and HF systems and VHF/UHF airborne,
shipboard and land mobile systems.
Characteristic Impedance: 50 ohms
Signal Gain: 10dB
Polarisation: Vertical
Noise Figure: <6dB
Power Supply: 12.5Vdc
Model No: Frequency Range Dimensions 3rd Order IP Current (mA)
RR6240 40kHz-60MHz 950 x 60 mm +50dBm 100mA
RR6241 40kHz-40MHz 950 x 60mm +55dBm 200mA
RR6245 50-2000MHz 600 x 90mm +36dBm 120mA
RR6246 50-2000MHz 600 x 90mm +48dBm 200mA
Type 101U Marine TV Antenna
This antenna lets you watch TV in your boat. It is omnidirectional so you don't even have to watch where you're
sailing.
The ideal MARINE TV ANTENNA type 101U
Reception from all directions without turning
Reception of all channels 2-80
The ideal MARINE TV ANTENNA type 101U Reception from all directions without turning. Reception of all
channels 2-80. Manufactured of weather proof materials Dimensions: 630 x 630 x 260 mm Weight: 2,5 kg
Impedance: 70 oHm To be placed as high as possible in the ship on top of a mast with diameter max. 40 mm.
Back