Specifications

http://entropy.brneurosci.org/radio-misc.html
40 / 86 28.8.2007 13:16
Brochure aor-7030plus-brochure.pdf
at www.rnw.nl/realradio/html/ar7030plus.html
http://www.thiecom.de/english/ar7030el.htm
The AOR AR7030+ is the result of a combined project between the AOR Company of Japan and a designer
group in England. The AR7030+ represents the very latest and best design featuring exceptionally strong signal
handling and bristling with enhanced features. The AR7030+ has been targeted to handle strong signals that are
of prime concern of European listeners. It offers greater than =35dBM IP3 (Intercept point 3) and greater than
100 dBm dynamic range. This coupled with excellent selectivity make the AR7030 a strong choice for the
shortwave broadcast listener or DXer. Although performance is excellent, features have not been forgotten. You
get: Synchronous AM, Passband Tuning, six levels of attenuation, dual VFOs and 24 hour clock-timer. The 400
scannable memories store frequency, bandwidth, PBS, Squelch and BFO settings. The mini headphone jack will
accept a mono or stereo 3.5mm plug. The two line 48 character backlit LCD gives you the status of the receiver.
The supplied full-featured 32 button infra-red remote provides access to virtually all facilities including: volume,
tone, numeric keypad, memories, PBT, filter selection, etc. A remote RS-232 level port (5 pin 240° DIN) is also
provided for computer control on the back panel. The Auxiliary Socket provides audio and timer outputs plus
455 kHz IF Output. The AR7030+ is similar to the AR7030, but with high tolerance components, 400
alphanumeric memories, enhanced RF attenuation and improved filters. Made in England. Includes 120 VAC
wall transformer. The optional BP123 allows portable operation. The installation charge for installing one or two
optional filters, or other option is $30.00 per item at time of receiver purchase. This product carries a one year
limited warranty by AOR USA.
Note: The sensitivity quoted by manufacturer is measured using non-standard conditions.
Frequency Range: 0 to 32 MHz
Receive Modes: USB, LSB, CW, AM, Synchronous AM, NFM, DATA
Sensitivity: (All measurements are p.d.at 50 ohm input)
20 kHz : 1.9 µV USB 2.2 kHz filter 10dB S+N/N (1.4 µV / RF Preamp ON)
100 kHz : 0.73 µV USB 2.2 khz filter 10dB S+N/N (0.34µV / RF Preamp ON)
500 kHz : 0.50 µV USB 2.2 kHz filter 10dB S+N/N (0.18µV / RF Preamp ON)
1.0 MHz : 0.52 µV USB 2.2 kHz filter 10dB S+N/N (0.19µV / RF Preamp ON)
0.88 µV AM 5 kHz filter 10dB S+N/N (0.36µV / RF Preamp ON)
1.8 MHz : 0.52 µV USB 2.2 kHz filter 10dB S+N/N (0.21µV / RF Preamp ON)
0.95 µV AM 5 kHz filter 10dB S+N/N (0.38µV / RF Preamp ON)
5.0 MHz : 0.50 µV USB 2.2 kHz filter 10dB S+N/N (0.19µV / RF Preamp ON)
0.86 µV AM 5 kHz filter 10dB S+N/N (0.35µV / RF Preamp ON)
14.0 MHz : 0.58 µV USB 2.2 kHz filter 10dB S+N/N (0.23µV / RF Preamp ON)
1.0 µV AM 5 kHz filter 10dB S+N/N (0.42µV / RF Preamp ON)
28.0 MHz : 0.60 µV USB 2.2 kHz filter 10dB S+N/N (0.23µV / RF Preamp ON)
1.0 µV AM 5 kHz filter 10dB S+N/N (0.40µV / RF Preamp ON)
1.2 µV NFM 10 kHz filter 12dB SINAD (0.48µV / RF Preamp ON)
32.0 MHz : 0.68 µV USB 2.2 kHz filter 10dB S+N/N (0.24µV / RF Preamp ON)
Selectivity:
Performance of the 445 kHz IF system and ignores effects of the 45 MHz roofing filter and any audio frequency response tailoring. AGC off.
2.2 kHz filter characteristics: -6 dB bandwidth:
-60 dB bandwidth :
-80 dB bandwidth :
6/60 shape factor : 2.29 kHz
3.34 kHz
4.98 kHz
1 : 1.46
5.5 kHz filter characteristics : -6 dB bandwidth :
-60 dB bandwidth :
-90 dB bandwidth :
6/60 shape factor : 5.54 kHz
9.11 kHz