Specifications

http://entropy.brneurosci.org/radio-misc.html
13 / 86 28.8.2007 13:16
Headphone Output .... ¼ inch.
Passband Tuning ..... ±2 kHz in USB, LSB and CW
Spurious Responses... 90 dBm for 3 kHz bandwidth at 50 kHz tone spacing
Third Order Intercept +10 dBm typical
Noise Floor ......... -126 dBm @ 3 kHz bandwidth
Memories ............ 1024 channels (8 banks x128) (frequency, mode, bandwidth)
Spectrum Sweep ...... 8 widths from 240 Hz to 2.4 MHz with tuning cursor
and selectable Autosweep function.
RS-232 Port ......... ?? baud.
IF Frequencies ...... 1st: 45 MHz, 2nd: 455 kHz, 3rd: 12 kHz
Environment ......... 0-50° C (32-122° F)
Dimensions .......... 12.125 x 5 x 13 inches (308x128x330 mm)
Weight .............. 12 Lbs. net (5.45 kg)
ICOM R75
Very popular and widely used. LF/MF/HF and lower VHF band. Relatively inexpensive.
Newer models have built-in DSP, which was optional on earlier models.
ICOM R75 Icom R75 All Mode HF and 50 MHz Receiver Regular Price: $799.99 Sale Price!: $549.99
Features include: 30kHz to 60MHz .03 to 60 MHz coverage, AM/SAM/FM/USB/LSB/CW/RTTY, Triple
Conversion Superheterodyne Rx, Synchronous AM Detection (S-AM), Superior Dynamic Range: >104 dB ,
Twin Passband Tuning (PBT), AF-DSP (optional), Noise Reduction, Auto Notch Filter.
The ICOM UT-106 Digital Signal Processing (DSP) module is a powerful option for the R75 receiver. This
board requires only plug-in installation and provides:
ANF Automatic Notch Filter ---- This automatically minimizes beat signals and heterodynes while preserving
the receive signal. Also, the notch frequency is automatically adjusted to follow interfering beat signals; for
example, reducing interference from RTTY signals during SSB reception. Works in SSB mode.
NR Noise Reduction -- reduces noise components and picks out desired signals which are buried in noise. The
received AF signals are converted to digital signals and then the desired signals are separated from the noise.
Works in AM, FM and SSB modes.
Both ANF and NR features are accessed through the receiver's LCD display menu. The ANF function can be
turned on or off via the menu. For NR, set the desired noise reduction level. The display will show what level
you are setting as you rotate the knob.
The R75 has many features included in the base radio (the only radio in it's class with DSP) at an affordable
price-check it out! MSRP = $949.00 Check out our full specs. and information at our website
www.LeesElect.com for all Icom radios. Instant Cash Coupons and Free UT-106 for a limited time only! Now is
the best time to buy. Try the R-75 and start listening to the world today!