600 Anypos Anypos600 User Manual AOPOS SYSTEMS S.A.
Anypos Welcome Thank you for purchasing our powerful Anypos! With this Guide is to help you operate the Anypos. About the Product The Anypos is an innovational solution of POS (point of service) and Kiosks, it provides unprecedented versatility for fast-paced retail locations. It helps retailers stay ahead of changing customer trends and prepare for growth.
Anypos Outlooking Front view DESCRIPTION 1 15-inch TFT LCD and Touch screen 2 Magnet Stripe Reader（Optional） 3 Power LED 4 HDD LED 5 Power Switch 6 Front Line-out jack（Optional） 7 Speaker（Optional） 8 RF card reader（Optional） When you use front Line -O ut jack, no voice will be out NOTE NOTE：When ine-O -Out from the speakers speakers..
Anypos Rear view DESCRIPTION 1 HDD Cover 2 Back Cover 3 Main Base 4 The screw for customer display 5 The hole for cables IO Ports
Anypos DESCRIPTION 1 AC adapter jack 2 PS2 KB 3 PS2 MS 4 Parallel port (LPT1) 5 VGA port 6 USB 1&2&3&4 7 RJ-45 LAN port 8 Microphone 9 Line-out 10 +12V Output jack 11 COM1 port 12 COM2 port 13 COM3 port 14 COM4 port OUT 12V COM1 COM2 COM3 COM4 NOTE NOTE：The default setting of customer display port is COM2 or COM4.For anypos616/632 is COM2,For anypos615 is COM4. Dismantle HDD 1、Dismantle the HDD cover, and find the HDD bracket.
Anypos 2、Remove the screw of the HDD bracket. 3、Pull out the HDD bracket. Mounting the Customer Display 1、Connect the customer display through the hole for cables to customer display port on the Anypos.
Anypos 2、Fix the display with 4 supplied screws. Mounting the 2nd Display 1、Connect the 2nd LCD display to the VGA port and +12V output jack separately through the holes for cables. 2、Fix the display with 4 supplied screws.
Anypos Wall Mounting 1、Fix the holder on the rear of the POS with 6 screws. 2、Mounting the bracket on the wall or other place with 4 screws. 3、Put the holder into brac ket,and fix them with 2 screws. Anypos can be use NOTE NOTE：Anypos usedd in Base Mounting or Wall Mounting Mounting..
Anypos Setup the Touchscreen The touchscreen must be calibrated before in use. 1、 After successful installation of diver, the following icons will appear on your desktop. 2、 Click on the “Touchkit”, the system will enter calibration interface. 3、Click the “Tools”button, then click the “Linearization” button. 4、A new window will be popped-up to guide the user do calibration.
Anypos 5、The set-up of touchscreen is finished ,the user can work it. 6、If you want to make the more accurate positioning, you can choose the “Linearization Style ” which in the “setting” to be 25 points and enter the “OK”, then can operate it according with the 3rd step.
Anypos PROBLEM The display screen is dark. “Invalid system disk, Replace the disk, and then press any key” The following message appears at boot up: “Invalid system disk, Replace the disk, and then press any key” An unidentified message is displayed. Can’t turn on the POS.
Anypos WARRANTY For your legal rights, promise you offer the warranty and service according to following standard: 1. Duration of limited warranty 1 year warranty. 2. Online Service You can obtain help from Aopos when you are unable to solve the problem. Please contact our service and Maintenance Department for any requires. Hotline:+34-902253588. Our service engineers will provide the most efficient help, or visit our website: www.aopos.com to obtain help online. 3.
