User manual

Anypos600 Point of Service

isabled Disable this sequence.

Default setting：USB-ZIP/ CD-ROM/HDD-0

Advanced Chipset Features

This menu is used for optimizing the chipset functions.

 Boot Display

This setting refers to the type of display being used with the system

Default setting: CRT+LEP

 Panel Number

This item is used to select the number to support LVDS panel.

Default setting: 3

Integrated Peripherals

Use this menu to set onboard peripherals features.

 OnChip LAN

This setting allows you to make OnChip LAN enabled or disabled.

Settings: Enabled and Disabled.

Default value setting: Enable.

 USB Keyboard Support

Enable USB Keyboard Support for DOS and Windows.

Settings:Enable and Disabled.

Default setting: Enable.

 Onboard LAN

Enables the onboard LAN controller. Settings :Enable and Disabled.

Power Management Setup

The Power Management Setup menu configures the system to most effectively save

energy while operating in manner consistent with your own style of computer use.

 Power Off by PWRBTN

This field configures the power button function. Settings are:

Delay 4 Sec The system is turned off if power button is pressed for more than four

seconds.

Instant-off The power button functions as a normal power-on/-off button.

Default setting：Delay 4 Sec

PnP/PCI Configurations

This option configures how PnP (Plug and Play) and PCI expansion cards operate in the

system. Both the ISA and PCI buses on the mainboard use system IRQs (Interrupt