User Guide

Chapter 2 – Driver Installation for Windows 95/98 SE/2000/ME
8
2.2 Driver Installation for Windows 98/98SE
Once your system is done booting, put the CD-ROM into the CD drive and Windows 98/98SE will detect new
hardware and started with the “Add New Hardware Wizard” to help you install the drivers correctly. All you
have to do now is follow the steps A, B, and C described below one by one to finish the installation.
A. For the driver installation steps of VA1000 WDM Audio Capture and Video Capture
1. This is the first window you would see on the left side
as you start installing the driver.
Click “Next” to continue.
2. Select the first option “Search for the best driver for
your device. (Recommended)”
Click “Next” to continue.
3. Select the option “Specify a location”,
Enter D:\Drv\Win98 and click “Next” to continue
.
4. The following prompt window tells the driver has been
found.
Click “Next” to continue.
5. Windows will start to copy files. Then the on-going
dialog box shows that the Window has finished
installing the drivers for PCI Multimedia Device