User Guide

Chapter 1－Settings for your Video Station VA1000 Lite/Plus
2
1.3 Hardware Installation
Caution:
Static electricity can severely damage electronic parts, Take these precautions:
 Before touching any electronic part, drain the static electricity from your body. You can do this
by touching the internal metal frame of your computer while it's unplugged.
 Don't remove a card from the anti-static container until you are ready to install it. When you
remove a card from your computer, place it back in its container.
 Don't let your clothes touch any electronic parts.
 When handling a card, hold it by its edges, and avoid touching its circuitry.
Please follow the steps shown below to install the card into your computer:
1. Turn off all your computer power and any peripherals.
2. Select an available PCI slot and remove the slot cover, screw, etc.
3. Put the Video Station VA1000 Lite/Plus card firmly into the PCI slot until it snaps in place and
secure the card by replacing the screw you remove from step 2.
4. Plug the TV cable into the antenna adapter input of Video Station VA1000 Lite/Plus.