User's Manual

- 10 -
- SETTINGS
Set Up Wi-Fi Connection
Make Wi-Fi Connection in Settings Æ Wireless & networks Æ Wi-Fi, slide
the Wi-Fi switch to the ON position.
Normally, the device will automatically scan the available Wi-Fi Access Point (AP). If
this does not happen, select icon Scan (upper right corner) to scan for the available
Wi-Fi APs. Then, tap on the desired AP to make the connection. If it is a secured AP,
system will prompt you for the password. Enter it by tapping on the password entry
line, and use the onscreen keyboard to enter the password. Then, tap on the Connect to
start connecting to that AP.
When connection is established, the Wi-Fi connected icon will show up on the
status bar.
Set Date and Time
Use Settings Æ Date & Time to open up the date/time setting screen as
shown below. Select the correct time zone. If the Wi-Fi is connected to Internet, check
on the Automatic date & time to have time set up automatically. If Wi-Fi is not
connected to Internet, uncheck Automatic date & time to temporarily set date and
time. Then, check Automatic again before leaving the screen. In the future, when the
Wi-Fi is connected to internet, date and time will be automatically adjusted.