User Guide

Software Installation
3-3
4.2 Software Installation in Windows 98
For installing Windows 98, please make sure you have followed below
procedures.
1. First, don’t install any add-on card.
2. Enable USB Controller in BIOS Setup menu to make BIOS fully capable
of controlling IRQ assignment.
3. Install Window 98 into your system.
4. Install the VIA 4 in 1 driver, which includes VIA Bus Master IDE Driver,
AGP Vxd driver, IRQ routing driver, and VIA chipset function registry
program.
5. Install the onchip audio driver.
6. Finally, Install other add-on cards.
Note: Make sure you have set the display mode to the
default setting (640 x 480, 16 colors) prior to uninstalling
the VIA 4 in 1 driver.
Note: Both VIA AGP driver and audio driver don’t support
Windows NT.