User Guide

Hardware Installation
2-15
2.3.12 Wake on Modem Connector
This motherboard implements special circuit to support
Modem Ring-On, both Internal Modem Card (AOpen
MP56) and external box Modem are supported. Since
Internal Modem card consumes no power when system
power is off, it is recommended to use an internal
modem. To use AOpen MP56, connect 4-pin cable
from RING connector of MP56 to the WOM connector
on the motherboard.
Pin
1
2
3
4
Description
+5V SB
NC
RING
GND
1
2
3
4
WOM
2.3.13 Wake on LAN Connector
This motherboard implements a WOL connector. To
use LAN Wake-up function, you need a network card
that supports this feature. In addition, you also need to
install network management software, such as ADM.
Pin
1
2
3
Description
+5V SB
GND
LID
1
2
3
WOL