User Guide

Hardware Installation
2-5
Intel Celeron CPU Core Frequency Ratio FSB Clock
Celeron 266 266MHz= 4x 66MHz
Celeron 300 300MHz= 4.5x 66MHz
Celeron 300A 300MHz= 4.5x 66MHz
Celeron 333 333MHz= 5x 66MHz
Celeron 366 366MHz= 5.5x 66MHz
Celeron 400 400MHz= 6x 66MHz
Celeron 433 433MHz= 6.5x 66MHz
Celeron 466 466MHz= 7x 66MHz
Home
Tip: If your system hangs or fails to boot because of over-
clocking, simply use <Home> key to restore to the default
setting. Press <Home> key and the power button at the same
time. Note that do not release <Home> key until POST screen
appears.
Warning: the VIA 694X chipset supports a maximum of 133MHz
FSB. The higher clock settings are for internal testing only. These
settings exceed the specification of the chipset, which may
cause serious system damage.
2.2.2 Setting the CPU Voltage
This motherboard supports the Pentium II / Pentium III / Celeron VID function,
the CPU core voltage is automatically detected and ranged from 1.3V to 3.5V.
2.2.3 Clearing the CMOS
JP14
1-2
2-3
Clear CMOS
Normal operation
(default)
Clear CMOS
You need to clear the CMOS if you forget your
system password. To clear the CMOS, follow
the procedure below:
JP14
1 2 3
Normal Operation
(default)
JP14
1 2 3
Clear CMOS