User Guide

Software Installation
3-3
3.2 Software Installation in Windows 98
For installing Windows 98, please make sure you have followed below
procedures.
1. First, don’t install any add-on card.
2. Enable USB Controller in BIOS Setup menu to make BIOS fully capable
of controlling IRQ assignment.
3. Install Window 98 into your system.
4. Install the VIA 4 in 1 driver, which includes VIA Bus Master IDE Driver,
AGP Vxd driver, IRQ routing driver, and VIA chipset function registry
program.
5. Install the onchip AGP driver.
6. Install the onchip audio driver.
7. Finally, Install other add-on cards.
In the AOpen Bonus Pack CD disc, you can find above drivers in the path
X:\Mx59pro\Driver (Where X: represents your CDROM drive).
Note: Make sure you have set the display mode to the
default setting (640 x 480, 16 colors) prior to uninstalling
the VIA 4 in 1 driver.
Note: Both VIA AGP driver and audio driver don’t support
Windows NT.