User Guide

AWARD BIOS
4-8
BIOS Features Æ Boot Sequence
Boot Sequence
A,C,SCSI
C,A,SCSI
C,CDROM,A
CDROM,C,A
CDROM,A,C
D,A,SCSI
E,A,SCSI
F,A,SCSI
SCSI,A,C
SCSI,C,A
C only
LS/ZIP,C
This parameter allows you to specify the system boot
up search sequence. The hard disk ID are listed below:
C: Primary master
D: Primary slave
E: Secondary master
F: Secondary slave
LS: LS120
Zip: IOMEGA ZIP Drive
BIOS Features Æ Swap Floppy Drive
Swap Floppy Drive
Enabled
Disabled
This item allows you to swap floppy drives. For
example, if you have two floppy drives (A and B), you
can assign the first drive as drive B and the second
drive as drive A or vice-versa.
BIOS Features Æ Boot Up NumLock Status
Boot Up NumLock
Status
On
Off
Setting this parameter to On enables the numeric
function of the numeric keypad. Set this parameter to
Off to disregard the function. Disabling the numeric
function allows you to use the numeric keypad for
cursor control.
BIOS Features Æ Security Option
Security Option
Setup
System
The System option limits access to both the System
boot and BIOS setup. A prompt asking you to enter
your password appears on the screen every time you
boot the system.
The Setup option limits access only to BIOS setup.
To disable the security option, select Password
Setting from the main menu, don't type anything and
just press <Enter>.