Service manual

4. DISASSEMBLY AND ASSEMBLY
Service Manual CNS-9701 4.19
When replacing the touch screen with a new one, the following parts should also be
replaced with new ones.
- Front cover: 1 pc.
- Plastic bracket for positioning of touch screen: 4 pcs.
1. Glue the 4 plastic brackets on the front cover to properly position the touch
screen on the front cover.
2. Attach the touch screen to the front cover with two-sided tape* so that the
touch screen is surrounded by the 4 brackets as shown below.
*3M™ Double Coated Urethane Foam Tape 4052 is recommended.
Replacing the Touch
Screen
3. Put the assembled front cover back to the original position. Refer to
“Replacing the LCD Assembly” steps 1 to 3.