Service manual

4. DISASSEMBLY AND ASSEMBLY
4.14 Service Manual CNS-9701
4. Remove the 12 nuts which secure the LCD assembly to the display unit
chassis.
5. Slightly pull the LCD assembly upward and disconnect the digital RGB flat
cable and power supply cable at the LCD assembly. Remove the LCD
assembly from the display unit. The LCD assembly contains the LCD,
backlight lamp and inverter for backlight lamp. These parts cannot be replaced
individually. The entire LCD assembly is the minimum replaceable unit.
NOTE in Assembling the Display Unit
To connect the digital RGB flat cable to the LCD assembly, align the pink
line of the flat cable and pin No. 1 of the socket on the LCD assembly.
Digital RGB
input socket
Digital RGB
cable tie
Power supply
input socket
Digital RGB
cable
Power supply
cable