Service manual

4. DISASSEMBLY AND ASSEMBLY
Service Manual CNS-9701 4.5
8. Disconnect the connection cable from the front panel which has the power switch,
power indicator, hard disk operation indicator and reset switch.
9. Disconnect the following cables from the motherboard.
- CD-IN cable which connects to the CD drive.
- FAN1 cable which connects to the fan on the rear panel.
- COM2 black cable which connects to the RECORDER socket (COM2 port)
on the rear panel.
NOTE in Assembling the Main Unit
To connect a flat cable to the motherboard, align the pink line of the
flat cable and the pin No. 1 of the socket.
Power switch
Power LED
Hard disk operation LED
Reset switch
Orange
White
White
White White
Green
Black
Red
DIMM1
CD-IN
COM2
FAN1