Service manual

4. DISASSEMBLY AND ASSEMBLY

4.2 Service Manual CNS-9701

Before performing the following procedure, shut down the main unit according to the

operator’s manual and disconnect the power cord from the main unit.

1. <Vorax5000>

Remove the 2 screws which secure the side panel to the main unit. Remove the

side panel from the main unit.

Disassembling the Main Unit

Remove the 2 screws which secure the side panel to the main unit.

Release the 2 hooks which secure the side panel to the main unit by pulling the

hooks outward, as shown by the arrows in the following figure. Remove the side

panel from the main unit.

NOTE in Assembling the Main Unit

To attach the side panel to the main unit, put the lower edge of the side

panel into the guide rail of the main unit chassis.

Replacing the Motherboard

-240