Service manual

3. BOARD/UNIT DESCRIPTION
3.2 Service Manual CNS-9701
256 MB Memory DIMM S-DRAM or DDR266
One chip 256 MB memory for working area is used. In future, a compatible
memory which has more working area may be used.
An IBM hard disk with IDE interface is used. A compatible hard disk which has
more data storage may replace the current hard disk in future.
A CD-ROM drive with IDE interface is used.
The graphic board has a PCI interface. Two same graphic boards are installed in
the main unit so that they allow you to use the two displays in dual mode.
If one of the two boards has a failure, the other board can be used for the display
unit of the central monitor. To use the board, assign the board as “1” in screen
properties in Windows 2000. Only the RADEON 32 (for Vorax5000) and RADEON
7000 (for Vorax5001) graphic boards are compatible because the CNS system
program was designed for these graphic boards only.
40 GB Hard Disk (by IBM)
CD-ROM Drive (by SAMSUNG)
Graphic Board RADEON 32 or RADEON 7000 (by ATI)