Service manual

8. NETWORK SETTINGS
Service Manual CNS-9701 8.13
You can see the network connection on the Maintenance window of the System
Setup on the central monitor. All instruments which are connected to the network
and are turned on are listed on the Maintenance window of the System setup.
Confirm the number of connected instruments.
1. Touch “System Setup” to display the System Setup screen.
Checking the Network Connection on the Central Monitor
The password is displayed
as ****.
2. Enter the password.
Manual setting of a central monitor’s IP
address is done on Windows 2000.
Touch to reload the latest information
CNS-XXXX: Central monitor (system)
BSM-XXXX: Bedside monitor
Tele-9000: beds whose data is received via the ORG-9200 multiple
patient receiver or transmitter.
(An IP address in parenthesis is the address where the bed’s data is saved.)
Group nameIP address
Instrument’s name
(bed name or CNS name)
3. Touch “Maintenance”. The Maintenance window opens and network
information is displayed.