Service manual

6. ADJUSTMENT
6.2 Service Manual CNS-9701
After performing the automatic adjustment, perform the following procedure.
1. Check that the CNS system program is running.
2. Select “Horizontal Position” from the setting items.
3. Adjust the horizontal position so that the left edge of the screen meets the left
edge of the LCD display area.
4. Use a magnifying glass and check that there is no position difference between
the left edges.
5. Select “Horizontal Size” from the setting items.
6. Adjust the horizontal size so that the right edge of the screen meets the right
edge of the LCD display area.
7. Use a magnifying glass and check that there is no position difference between
the right edges.
8. Select “Focus” from the setting items.
9. Adjust the focus so that the entire screen is most clearly displayed. If the focus
setting is not optimal, the screen blurs.
10. Select “Color Temperature Menu” from the setting items and select each
primary color in the color temperature menu to adjust the color tone.
NOTE
When the primary color has something wrong, usually it is caused by a
failure of the display unit, main unit or cable between them. Solving the
problem with the color tone adjustment is rare.
Manual Adjustment