Service manual

4. DISASSEMBLY AND ASSEMBLY
4.24 Service Manual CNS-9701
Replacing the Platen
Roller/Bushings/Gear
1. Open the paper magazine with the paper magazine release lever. The paper
guide and assembly of the roller, bushings and gear are in the recorder sub
assy.
2. Pull both edges of the roller guide outward as shown below and remove the
paper guide from the recorder sub assy.
3. Insert a small flat-blade screwdriver into the space between the gear and
frame of the paper magazine as shown below. Pry up the assembly of the
roller, bushings and gear with the screwdriver until the assembly pops out.
4. Remove the roller, bushings and gear from the assembly. Replace the roller,
bushings or gear with a new one and assemble the recorder unit by reversing
the above procedure.
Gear
Bushings
Platen roller
Paper guide