Service manual

4. DISASSEMBLY AND ASSEMBLY

4.22 Service Manual CNS-9701

1. Remove the AC inlet socket from the recorder unit according to the “Removing

the AC Inlet Socket”.

2. Remove the screw which secures the RS232C interface board to the recorder

chassis.

3. Remove the board from the recorder unit.

1. Remove the AC inlet socket from the recorder unit according to the “Removing

the AC Inlet Socket”.

2. Remove the screw which secures the power supply unit to the recorder chassis.

3. Remove the power supply unit from the recorder unit.

1. Remove the recorder sub assy from the recorder unit according to the

“Removing the Recorder Sub Assy”.

2. Remove the 2 screws which secure the front panel to the recorder chassis.

3. Remove the front panel from the recorder unit.

Removing the RS232C

Interface Board

Removing the Power

Supply Unit

Removing the Front Panel

NOTE

When the front panel is replaced with a new one, the Nihon Kohden model

number label also must be replaced with a new one.

Screw