User guide

GUI Reference

JTAG device—Specifies the device on the selected JTAG chain.

Refresh—Updates the list if you change your JTAG devices

while in the Flash Programmer dialog box.

The Target Connection tab specifies the download cable and device for the

selected configuration.

The Target Connection tab contains the following settings.

o JTAG cable—Specifies the Altera download cable (such as the USB

Blaster) to use for communicating with the Nios II processor. If you have

only one cable, the automatic value selects your cable.

Refresh—Updates the list if you change your JTAG cables while in

the Flash Programmer dialog box.

o JTAG device—Specifies the device on the selected JTAG chain.

Refresh—Updates the list if you change your JTAG devices while

in the Flash Programmer dialog box.