Installation guide

53
Note:
 Whenever you change this item, it will only take effect after you restart
the system and successfully boot the Windows or DOS.
 Wake on Mouse function applies to PS/2 mouse only.
 If you set a password but forget it, please clear CMOS.
If you want to use Wake on Mouse function in DOS, it is necessary to install
the DOS driver of the mouse.
Integrated peripherals > SuperIO Device
This item allows you to set SuperIO device.
Power ON Function: This item is used to select Wake on Keyboard/Mouse mode.
z Any Key: This function allows you wake up the system by clicking any
key.
z Button Only: Disable Wake on KB/MS function. You can boot up your
system by power button only.
z Keyboard 98: If selecting this option, you can boot up the system by
power button and the “Wake” key on Keyboard 98.
z Password: Disable the function of power button and let the system can
only be powered on through the preset keys (like a password).
z Hot Key: If selecting this option, you also need to specify the hot key
from “Hot Key Power On” item.
z Mouse Left: This function allows you wake up the system by clicking left
mouse button twice successively.
z Mouse Right: This function allows you wake up the system by clicking
right mouse button twice successively.