Installation guide

17
Maximum The Performance of the Dual Channel
To obtain the highest performance of Dual Channel, the configuration of DIMM
must meet the following conditions.
Matched DIMM configuration in each channel
● Same density (128MB~1GB)
As long as you insert memory modules of same density into Channel 1 (DIMM1
& DIMM3) and Channel 2 (DIMM2 & DIMM4), dual channel mode will be
enabled.
DIMM1 + DIMM3 = DIMM2 + DIMM4
Ex: if you insert 1GB memory module into DIMM1 and DIMM3, dual channel
mode will be enabled when DIMM2 + DIMM4 = 1GB
● Same DRAM bus width (x8 or x16)
● Either single-sided or double-sided
When dual channel mode is successfully enabled, the screen will show “Dual
Channel Mode Enabled” while entering POST screens.
Note: Using memory modules of different chip will
cause system unstable.