User`s guide

F
F
o
o
r
r
t
t
r
r
e
e
s
s
s
s
7
7
1
1
0
0
0
0
O
O
n
n
l
l
i
i
n
n
e
e
M
M
a
a
n
n
u
u
a
a
l
l
the device’s priority on the bus during the arbitration phase. The arbitration phase determines which
device controls the bus when two or more devices request for the use of it.
Using
and then press to select the SCSI ID if you need to change it. Press
at any time to return to the previous menu.
4.3.2 SCSI Parity Checking
Select this option to enable or disable the SCSI parity checking function on the SCSI controller.
The screen below displays the selections. The default setting is “Enabled”.
The SCSI controller always checks parity when reading from the SCSI bus to verify the correct
transmission of data from the SCSI devices. You should disable the SCSI Parity Checking
parameter if any of the installed SCSI devices do not support SCSI parity. Most currently available
SCSI devices support this feature.
143
Open
A