Specifications

The Wi-Fi Catcher Network Locator has an LED that operates as follows:
¡ Flashing blue: Searching for networks
¡ Solid blue: Strong network found
¡ Solid yellow: Weak network found
¡ Off: No signal found

USB connectors

security cable slot —
Lets you attach a commercially available antitheft device to the computer (see Security Cable Lock).
Back View

air vents —
The computer uses an internal fan to create airflow through the vents, which prevents the computer from overheating.


AC adapter connector
The AC adapter converts AC power to the DC power required by the computer. You can connect the AC adapter with your computer turned either on or off.


NOTE: The Dell Wi-Fi Catcher Network Locator light appears only when the computer is turned off and wireless networking is activated in the system
setup program.
Connect USB devices, such as a mouse, keyboard, or printer.
1
air vents
2
AC adapter connector
3
USB connector
4
network connector (RJ-45)
CAUTION: Do not block, push objects into, or allow dust to accumulate in the air vents. Do not store your computer in a low-airflow environment,
such as a closed briefcase, while it is running. Restricting the airflow can damage the computer or cause a fire.
Connects an AC adapter to the computer.
CAUTION: The AC adapter works with electrical outlets worldwide. However, power connectors and power strips vary among countries. Using an
incompatible cable or improperly connecting the cable to the power strip or electrical outlet may cause fire or equipment damage.
NOTICE: When you disconnect the AC adapter cable from the computer, grasp the connector, not the cable itself, and pull firmly but gently to avoid
damaging the cable. When you wrap the AC adapter cable, ensure that you follow the angle of the connector on the AC adapter to avoid damaging the
cable.