Specifications


1. Follow the procedures in Before You Begin.

2. In the battery bay, locate the SIM compartment.

3. Slide in the SIM into the compartment as indicated on the battery bay.
InternalCardWithBluetooth™WirelessTechnology

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed. The Bluetooth wireless technology card is located in the
battery compartment.

1. Follow the procedures in Before You Begin.

2. Ground yourself by touching one of the metal connectors on the back of the computer.

3. Pull the card out of the battery compartment so that you can disconnect the card from its cable and remove it from the computer.

4. To replace the card, connect the card to the cable and insert it into the compartment.

5. Replace the battery.
Optical Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTE: Only GSM (HSDPA) type cards need a SIM. EVDO cards do not use a SIM.
1
SIM
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTE: If you leave the area, ground yourself again when you return to the computer.
1
internalcardwithBluetooth™Wirelesstechnology
2
cable
3
bluetooth compartment

