Installation manual

The Lifestyle Programmable Control Part # 99-LS01 (Optional for 150ERV and 200ERV only)
The optional Lifestyle Programmable Control is fully digital and
allows you to program when and how much fresh air will be entering
your home.
Key Features
• 24 / 7 programmable ventilation • 4 programmable events per
day
• 5 Speed Fan setting • Electronic Dehumidistat (disabled on
models 150ERV and 200 ERV)
• Two Selectable Modes of Operation
20 min. ON / 40 min. OFF
Continuous Ventilation
• 20 / 40 /60 High Speed override timer
• Service/Maintenance Reminder display
• Easy to read Backlit LCD screen
Setting Date & Time
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press and release the MODE button until "TIME" and "SET"
appear on the screen. Press SET Button.
3. The letter for the day of the week flashes. SCROLL (using
Up/Down arrows) to the correct day of the week. Press the SET
button.
4. The hour and "AM" or "PM" flashes. SCROLL to the correct
hour and press the SET button.
5. The minutes will flash. SCROLL to the correct minute. Press the
SET button.
Programming Your Control
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press and release the MODE button until "PROGRAM SET"
appears on the screen. Press SET.
3. Weekday letters (MTWTF) will flash. Press SET.
4. "WAKE" flashes. Press SET.
5. "AM" or "PM" flashes. SCROLL to desired time (in 20 minute
intervals). Press SET.
6. The "FAN" symbol flashes. SCROLL to the desired fan speed
(0-5). Press SET.
7. “VENT”, “20/40”or “OFF” will flash. SCROLL to the desired
mode of operation. Press SET twice.
8. "LEAVE" flashes. Press SET. Repeat steps 4 to 6 to program
four events per day.
9. “SS” (Saturday & Sunday) flashes. Press SET. Repeat steps
3 to 7 to program the weekend events.
Programming Individual Weekday Events
After performing the MTWTF and SS programming functions, you
can program individual weekday events.
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press and release the MODE Button until "PROGRAM SET"
appears on the screen. Press SET.
3. Weekday letters (MTWTF) will flash. Scroll to the desired
weekday (M,T,W,T,F,S,S). Press SET.
4. “WAKE” flashes. Scroll to the desired event that you want to
program as a custom setting (“WAKE”, “AWAY”, “RETURN” or
“SLEEP”. Press SET.
5. Either “AM” or “PM” flashes. SCROLL to the desired time
(available in 20 minute intervals). Press SET.
6. “FAN” flashes. SCROLL to desired fan speed (0 - 5). Press SET.
7. “VENT”, “20/40” or “OFF” will flash. SCROLL to the desired mode
of operation. Press SET. (Refer to Manual for explanation of
operational modes.)
8. More weekday events are programmable by pressing SET and
repeating steps 4 to 7.
Running the Program
Upon completion of the programming, you must activate the
program.
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press MODE until the program indicates “PROGRAM” and
“RUN”.
Manually Setting the Control
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press and release MODE until the program indicates "MANUAL"
and "RUN”. Press SET.
3. When the FAN symbol flashes, SCROLL (use the Up/Down
arrows) to the desired fan speed (0-5). Press SET.
4. VENT, 20/40 or OFF will flash. SCROLL to the desired mode of
operation. Press SET.
NOTE: The control remains in the “MANUAL RUN” position until you
change back to “PROGRAM RUN” (Refer to “Running the
Programmed Setting).
**Timers will not function when mode of operation is set to
“OFF”.
Setting the Dehumidistat
Dehumidistat is disabled on 120ERV, 150ERV and 200ERV).
20/40/60 Minute High Speed Timer
This function temporarily initiates high speed ventilation for 20, 40 or
60 minutes.
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press the FAN button once for 20, twice for 40 and three times
for 60 minutes and four times to cancel the timer.
Service Indicator
A ‘SERVICE’ indicator displays once every 4 months. Refer to
"Maintenance Routine" in the Operation & Installation manual.
To reset the service indicator:
1. Refresh the screen: use the ON/OFF button to turn the control
OFF and ON.
2. Press and release the Up and Down buttons simultaneously. The
“SERVICE” icon will flash for 5 seconds.
3. Press SET within the 5 seconds and the service indicator will
reset.
Instruction card
Fan Speed
Indicator
2
0/40/60 Minute
High Speed
Override Button
Mode Select
B
utton
ON/OFF
B
utton
H
igh Speed
Override
T
imer
Indicator
Humidity
I
ndicator
Up Button
Set button
Decrease
B
utton
Service
I
ndicator
M
ode
Indicator
Date & Time
Daytime
Event
P
rogram
Indicator
Connects to 3 wire 20 gauge
low voltage wire
ATTENTION
Only one main control can be installed on your system.
7