Installation manual

The Lifestyle Ventilation Control Part #99-BC01 (Optional Control for 120ERV only)
The Lifestyle RNC Ventilation Control offers ON/OFF, High
Speed/Low speed plus an electronic dehumidistat.
Key Features
2 Speed Fan setting (Low/High)
Electronic Dehumidistat (disabled on 120ERV)
Instruction Card is inserted in the control
Slim-line design
Connect to 3 wire 20 gauge low voltage wire.
Turning on the Control
Press and release the ON/OFF button. The "ON Indicator
Light" will illuminate.
Adjusting the Ventilation Speed
The unit will normally operate at low speed. Press and
release the SPEED button to initiate high speed ventilation.
The "High Speed Indicator LED" will illuminate.
Humidity Control
Dehumidistat is disabled on models 120ERV, 150ERV and
200ERV.
%
8
0
2
0
H
IG
H
Instruction card
Dehumidistat
Indicator LEDs
ON/OFF
button
High/Low
Speed
button
High Speed
Indicator LED
On
indicator
light
*Install a jumper between 2 (ON) and 3 (RED) on
the HRV terminal block to configure the ON/OFF
button to ON/STANDBY. Refer to “Setting Standby
when using a Main Control” in this manual.
Note
4