User Guide

8
Checks and preparations
before installation
SCSI connecting
This DVD-RAM drive conforms to the SCSI-2 standard.
A SCSI host adaptor is therefore required to connect the DVD-RAM drive with a
personal computer.
If a SCSI host adaptor is not already installed in your computer you must purchase
one separately.
Example
No more than 7 SCSI units (A-G) can be connected to a computer. Also, the total
length of the SCSI cable from the personal computer to the last unit must be shorter
than the length specified by the SCSI interface board (card) to be used.
SCSI host adaptor
SCSI unit B
SCSI unit A
SCSI unit D
SCSI unit E
SCSI unit F
SCSI unit C
SCSI unit G
Jumper pin setting
Note: When you insert a jumper pin, "ON" is set.