User Guide

39
When this occurs Possible cause
Refer to
Page
♦ Is the DVD-RAM disc dirty?
♦ Has condensation formed in the drive?
(Wait an hour or so after turning on the
computer for the drive to dry out and then
try operating.)
1
1
PD cartridge cannot
be read or written to.
♦ Did you initialize (format) the PD cartridge?
♦ Did you access the correct drive letter
assigned to the drive?
♦ Did you insert the PD cartridge with the
space for an adhesive label facing up?
♦ Is the PD cartridge dirty?
♦ Has condensation formed in the drive?
(Wait an hour or so after turning on the
computer for the drive to dry out and then
try operating.)
23
25
7
1
1
Discs cannot be
read.
♦ Did you access the correct drive letter
assigned to the drive?
♦ Only the discs supported by this drive can
be used.
♦ Have the discs been placed correctly in the
tray?
♦ Did you insert the discs with label facing up?
♦ Are you using correct software program for
playing discs?
♦ Is the disc dirty, scratched, cracked, warped,
written on the surface or is a label put on the
disc?
♦ Has condensation formed in the drive?
(Wait an hour or so after turning on the
computer for the drive to dry out and then
try operating.)
25
3
7
7
--
1
1
No sound from the
stereo system.
♦ Have the drive and sound board been
connected correctly?
12