User Guide

ManualsBrandsAOpen ManualsOtherDRW8800APP0403A

DRW8800 APP

DVD-R/RW CD-R/RW WRITER

LECTEUR DE DVD-R/RW, CD-R/RW

DVD-R/RW-CD-R/RW-WRITER

Warning: This model does not have a waterproof function. To prevent fire or impact,

do not expose it to rain or in a damp environment, nor place it near any water source

such as potted landscape, vase, cosmetic bottle, medicine bottle, etc.

This product meets the EMC requirement

（

89/336/EEC, and revised in accordance with

2/31/EEC and 93/68/EEC

）

The acoustic volume generated by this model is lower than 70 dB

（

ISO7779/DIN45635

）

This unit belongs to Grade-B digital model, which meets the ICES003 requirements.

Cautions:

The flash arrow symbol marked in the equilateral

triangle is to warn the user to watch the non-insulated

“dangerous voltage” in the product housing so as to

avoid electric shock hazard.

Notice

Electric Shock!

Do Not Open.

Caution:

To prevent electric shock hazard, do not remove the

cover (or backside), nor attempt to repair any parts

within. The unit shall be serviced by a well-trained

person only.

The exclamation symbol marked in the equilateral

triangle is to warn the user to observe important

operation and maintenance (repairs) instructions

specified in the provided manual.

• Do not touch or scratch the signal surface

(bright side) of disk.

• Hold both side of disk or hold the central

with one hand and hold either side with

another hand.

• Do not stick any paper or labels on the

disk.

• Discard warped or cracked disks because

they may damage the drive unit.

• Do not use specially shaped disks such

as heart shape or polygon.

Summary of content (9 pages)

PAGE 1
DRW8800 APP DVD-R/RW CD-R/RW WRITER LECTEUR DE DVD-R/RW, CD-R/RW DVD-R/RW-CD-R/RW-WRITER Warning: This model does not have a waterproof function. To prevent fire or impact, do not expose it to rain or in a damp environment, nor place it near any water source such as potted landscape, vase, cosmetic bottle, medicine bottle, etc. This product meets the EMC requirement（89/336/EEC, and revised in accordance with 92/31/EEC and 93/68/EEC）.
PAGE 2
Note: In accordance with Part 15 of FCC, it has been confirmed that this equipment has passed the test and meets the restrictions on Grade-B digital model. The purpose of design restriction is to provide reasonable protection for home appliance against harmful interference. Because this equipment generates, uses and emits an infinite frequency, harmful interference may be caused to the wireless communication if failure to install and use this equipment according to the instructions contained in the manual.
PAGE 3
Caution: This product contains over Class 1 laser diodes. To ensure continuous safety, do not unpack any cases or attempt to access the internal side of the product. A qualified person must execute all maintenance services. This model is affixed with the following caution label that should be tagged at the upper part of the cover. CLASS.1.LASER.PRODUCT. LASER KLASSE 1 Upon using the equipment provided with a receptacle, then such receptacle shall be placed near the equipment for convenience of use.
PAGE 4
Instructions of Safety To ensure your safety and demonstrate the maximal operation performance of the drive, be sure to read this manual carefully and observe the following safety precautions: Environment: Do not use the unit in a dusty, high temperature or high humidity environment. Use this equipment in a place free from the effects of vibration or impact. Power Source: Before installing this equipment in the system, be sure to disconnect he power source and remove power cord from AC socket.
PAGE 5
Features • Writing Speed DVD-R, at 8X-Zone CLV, 6X-CLV, 4X-CLV, 2X-CLV, 1X-CLV. DVD-RW, at 4X-CLV, 2X-CLV, 1X-CLV. DVD+R, at 8X-Zone CLV, 6X-CLV, 4X-CLV, 2.4X-CLV. DVD+RW, at 4X-CLV, 2.4X-CLV. CD-R, at 24X-Zone CLV, 20X-Zone CLV, 16X-CLV, 8X-CLV, 4X-CLV. CD-RW, at 24X-Zone CLV, 20X-Zone CLV, 16X-CLV, 10X-CLV, 4X-CLV. • Max.
PAGE 6
Interface Front View 1 Force Eject Hole ○ If the tray fails to eject upon pressing the Eject button, insert the eject pin into the hole and then push out the tray from within. In normal operation, use the Eject button to eject the tray. At this time, confirm the drive power has been disconnected and then wait for over one minute until the disk stops turning before inserting the pin in the eject hole.
PAGE 7
Rear View 6 Audio Output Port ○ Analog audio output connector used. Because the Molex 70553 connector is used, a proper connecting cable should be selected. Pin Code Function 1 L Left channel audio output. 2 G Grounding 3 G Grounding 4 R Right channel audio output. 7 Cable Connector: ○ After inserting the short circuit socket, the switch will be set in the ON position. Before changing the connector setting, be sure to confirm the drive power source. Pin #1 has been set at ON position upon delivery.
PAGE 8
Installation c Switch off the PC power. Remove the power cord from the AC socket and then remove the cover or the panel. d Remove empty panel installed in front of the 5.25” slot. e Install fixed glide rails on the drive (contact your dealer or computer manufacturer when glide rails are required). f Insert drive into the slot. g To fix it, please refer to the computer manual. • Install the unit with the screw less than 5mm, because longer screws may damage the drive.
PAGE 9
Specification [Installation] This drive is available for vertical and horizontal application. [Disk Size] • 12cm (4.72”) / 8cm (3.15”)* * 8cm (3.15”) cannot be used in vertical application. [Data Transmission Speed] Data Reading（continuous type） DVD Max. 16.62 Mbyte /sec CD Max. 6 Mbyte /sec （17.1~40X CAV mode in case of 16-zone transmission） Data Writing（continuous type） DVD Max. 11.08 Mbyte/sec (DVD-/+R is 8X) CD Max. 3.