User Guide

Hardware Installation English
 Adjust the Device Configuration Jumper of the DVD+RW/+R to “Slave” (SL)
position.
4. First remove the 5.25-inch panel. Further detail of how to remove this can be
found in your computer manual.
5. Place the DVD+RW/+R into the slot. Do not force it in any further than need be
due to the connector cables.
6. Use four provided screws (size: M3x0.5x4mm) to secure the drive into the
half-height bay. The screws electronically ground the drive.
-- E-16 --