User Guide

Hardware Installation English
-- E-14 --
Before plugging in the jumpers please make sure you have switched
off the power supply of both the DVD+RW/+R and the computer.
Please make sure the jumpers are inserted as displayed in the
diagram otherwise you may cause irreparable damage to your
DVD+RW/+R device
Note: Installing jumper pins besides the ones for device configuration
settings may be the cause of damage or abnormal drive operation.
3.3. Installing the DVD+RW/+R drive
Power off your computer and all peripheral devices. Unplug the computer’s power
cord from wall outlet or from the power strip.
Required Tools
 A medium-size screwdriver
 A long-nosed pliers
 Your computer system or motherboard manual (to locate your computer
system’s IDE controller).
Installation Procedure
The discharge of static electricity can damage electronic circuitry. You can
avoid static discharge by touching a grounded metal object, like your
computer case, before and during installation of hardware inside your
computer.