User Guide

Hardware Installation English
-- E-9 --
3. Hardware Installation
The installation of this product is fast and easy. Please follow these instructions
described below:
3.1. System Requirements
A PC system with the following features is highly recommended for ensuring a stable
DVD+RW/+R performance.
CPU We suggest using a Pentium !!! 850MHz
or above (JustLink in use)
Memory 128MB or above
System
requirements
Operating
systems
Windows 98, Windows 2000, XP
Windows Me, NT WS4.0 SP5 or above
Interface Compatible with Enhanced IDE, and Blank Primary
Slave, Secondary Master, and Secondary Slave
Hard disc Average saving time is 19ms or lower, max data transfer
speed is 33.3MB/sec; disc space 500MB or over
Voltage +12V or +5V voltage switches
*CD-RW discs: perhaps are unable to be read in the CD-ROM. If this situation
comes about it is likely that your CD-ROM is not compatible with multi-read please
change to a Multi-read compatible CD-ROM or use your AOpen DVD+RW/+R.
*All Multi-read CD-ROM devices have the following features
(1) CD-ROM is able to read data created by optical heads
(2) CD-ROM will support the UDF specification (Packet Writing)