User Guide

COM4012 COMBO DRIVE

2. Analog Audio Output Connector

This connector allows you to connect the drive to your sound card with

a 4-pin audio cable.

3. Device Configuration Jumper

Set the jumper to Master, Slave or Cable Select according to your

system configuration.

4. IDE Interface Connector

Plug one end of the 40-pin IDE cable here to join the 40-pin IDE

connector on the motherboard. The red-edge of the IDE cable must be

connected to Pin 1 of each connector.

5. Power Supply Connector

By plugging the computer’s power supply cable here, you can connect

the Combo Drive and your computer system.