User Guide

Table of Contents

4 Emergency-eject Option

The Emergency-eject option allows the user to manually open the CD tray

during a power malfunction.

Follow these steps to manually open the disc tray:

1. Locate the tiny hole at the bottom of the disc tray. Gently poke the hole

three times with a sharp needle or a clip.

2. When the disc tray opens, pull out the tray and remove the disc from the

CD-ROM drive.

If your CD-ROM does not have an emergency-eject hole follow these steps:

1. Locate the bottom edge of the disc tray. Gently pry the disk tray open

with a screwdriver.

2. When the disc tray opens, simply remove the disc from the CD-ROM

drive.

NOTE: Do not do this unless absolutely necessary. This procedure

may damage the CD tray.