Specifications

AWARD BIOS
3-27
PCI Slot Location 1
(pin A6)
Location 2
(pin B7)
Location 3
(pin A7)
Location 4
(pin B8)
Slot 1 INTA INTB INTC INTD
Slot 2 INTB INTC INTD INTA
Slot 3 INTC INTD INTA INTB
Slot 4 INTD INTA INTB INTC
Slot 5 (if any) INTD INTA INTB INTC
PNP/PCI Configuration Used MEM Base Addr
Used MEM base addr
N/A
C800
CC00
D000
D400
D800
DC00
This item, in conjunction with the "Used MEM
Length", lets you set a memory space for non-PnP
compatible ISA card. This item specifies the
memory base (start address) of the reserved
memory space. The memory size is specified in the
"Used MEM Length".
PNP/PCI Configuration Used MEM Length
Used MEM Length
8K
16K
32K
64K
If your ISA card is not PnP compatible and requires
special memory space to support its function,
specify the memory size in this parameter to inform
the PnP BIOS to reserve the specified memory
space for installed legacy ISA card.
3.7 Load Setup Defaults
The "Load Setup Defaults" option loads optimized settings for optimum
system performance. Optimal settings are relatively safer than the Turbo
settings. We recommend you to use the Optimal settings if your system has
large memory size and fully loaded with add-on card (for example, a file
server using double-sided 8MB SIMM x4 and SCSI plus Network card
occupying the PCI and ISA slots).