User`s guide

Frequently Asked Questions
B-10
Primary IDE Controller
Secondary IDE Controller
PCI Bridge:
This device stands for the "ACPI" feature which implemented within
PIIX4(82371AB) chipset. This new feature is expected to be fully utilized
under Windows'97(Memphis). Please look for more details on ACPI from
FAQ "What is ACPI?".
PCI Card:
There is driver ne cessary in order to support Universal Serial Device under
Win'95. Microsoft has implemented the driver since Win'95 OEM Service
Release 2.1 (OSR 2.1) & it will recognize USB port without any problem.
Pleae contact your USB device vendor or system vendor of more
inforamtion. Also, more details for USB in the FAQ of "What is USB?".
Standard Dual PCI IDE Controller:
The IDE controller chipset -- PIIX4 -- will be fully recognized under
Windows'97 also. In the mean while, you may download the driver for
Win'95 from AOpen homepage at "http://www.aopen.com.tw" which supports
both Bus Mastering & Ultra DMA/33. After installation, you should be able to
see Win'95 recognize it under Device Manager as below:
-Hard Disk Controllers
Intel 82371AB PCI Bus Master IDE Controller
Primary Bus Master IDE Controller
Secondary Bus Master IDE Controller
Even though all of above are the current limitations of Win'95 on Intel 430TX
chipset which are expected to implement on Win'97, your system still can
enjoy the best performance of AP5T/AX5T without any problem.
Q: Which version of the Windows '95 that I am using?
A: You may determine the version of Windows '95 by following steps.
1. Double click "System" in "Control Panel".
2. Click "General".
3. Look for "System" heading & refer to following,
4.00.950 Windows 95
4.00.950A Windows 95 + Service Pack or OEM Service Release 1