User Guide

AWARD BIOS
3-22
PNP/PCI Configuration Æ DMA 0
PNP/PCI Configuration Æ DMA 1
PNP/PCI Configuration Æ DMA 3
PNP/PCI Configuration Æ DMA 5
PNP/PCI Configuration Æ DMA 6
PNP/PCI Configuration Æ DMA 7
DMA 0
Legacy ISA
PCI/ISA PnP
If your ISA card is not PnP compatible and requires a
special DMA channel to support its function, set the
selected DMA channel to Legacy ISA. This setting
informs the PnP BIOS to reserve the selected DMA
channel for the installed legacy ISA card. The default is
PCI/ISA PnP. Take note that PCI card does not require
DMA channel.
PNP/PCI Configuration Æ PCI Slot1 IRQ (Right)
PNP/PCI Configuration Æ PCI Slot2 IRQ
PNP/PCI Configuration Æ PCI Slot3 IRQ
PNP/PCI Configuration Æ PCI Slot4 IRQ (Left)
PCI Slot1 IRQ
3
4
5
7
9
10
11
12
14
15
Auto
This item is reserved for engineering purpose to let
you assign an IRQ manually to the add-on card on
each PCI slot. If you select Auto, system will
automatically assign an available value to the device.
It is suggested to use default setting, which is Auto, in
order to comply with PnP specification completely.