User Guide

AWARD BIOS
3-8
BIOS Features Æ Boot Up NumLock Status
Boot-up NumLock
Status
On
Off
Setting this parameter to On enables the numeric function
of the numeric keypad. Set this parameter to Off to
disregard the function. Disabling the numeric function
allows you to use the numeric keypad for cursor control.
BIOS Features Æ Memory Parity/ECC Check
Memory
Parity/ECC Check
Enabled
Disabled
This item is used to enable or disable parity/ECC chek
function.
BIOS Features Æ Typematic Rate Setting
Typematic Rate
Setting
Enabled
Disabled
Set this parameter to Enable/Disable the keyboard
repeat function. When enabled, continually holding down
a key on the keyboard will generate repeatedly
keystrokes.
BIOS Features Æ Typematic Rate (Chrs/Sec)
Typematic Rate
6
8
10
12
15
20
24
30
This item allows you to control the speed of repeated
keystrokes. The default is 30 characters/sec.
BIOS Features Æ Typematic Delay (Msec)
Typematic Delay
250
500
750
1000
This parameter allows you to control the delay time
between the first and the second keystroke (where the
repeated keystrokes begin). The typematic delay
settings are 250, 500, 750, and 1000 msec.