User Guide

Hardware Installation
2-29
2.5 Windows 98 Installation
For installing Windows 98, please make sure you have followed below
procedures.
1. First, don’t install any add-on card except the display card.
2. Enable
USB Controller in BIOS Setup menu, making BIOS fully capable
of controlling IRQ assignment.
3. Install Window 98 into your system.
4. If you use an AGP card, you still need to Install the VIA AGP Driver.
5. Then install drivers that come with your AGP card.
6. Install the VIA IRQ routing driver, which will correct the partially wrong IRQ
routing table for MVP3 chipset in Windows 98.
7. Finally, Install other add-on cards.
In the AOpen Bonus Pack CDROM, you can find above drivers in the path
X:\Ax59pro\Driver (Where X: represents your CDROM drive).